In a message dated 9/25/01 10:10:00 AM, KENWILFY@AOL.COM writes: << We replaced it with a line that was made up from a local hydraulic shop and the diameter of the line is a little smaller that the stock line. . . . Any ideas as to what could be causing this problem? >> Smaller diameter, higher velocity. Tune it to a different octive. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.