Date:         Mon, 24 Sep 2001 12:34:10 EDT
Reply-To:     JKrevnov@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rico Sapolich <JKrevnov@AOL.COM>
Subject:      Re: Temp sensor II replacement
Comments: To: CMathis227@aol.com
Content-Type: text/plain; charset="US-ASCII"

In a message dated 9/24/01 7:40:13 AM, CMathis227@AOL.COM writes:

<< If you have everything ready to go you can replace the Temp II with a
minimum
of coolant loss (a couple of tablespoons).  Be sure the engine is really cool
when you do it.  Move quickly but carefully.

Chuck >>

Laurence,

That pretty much covers it except there are 2 additional tools which are nice
to have at hand if things do not go as planned: a balled up rag to serve as a
temporary stopper and a helper should you drop something while your thumb is
stuck in the temperature switch hole.

Rich

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.