Joel Sell wrote: > How much time will it take me to replace two head gaskets and a water pump? > I'm fairly well versed in air-cooled VWs, but these waterboxers are still a > bit mysterious to me. I'm thinking that a weekend (all day Sat and Sun) > will be enough to replace two head gaskets and, if necessary, JBweld the > head corrosion. Am I right? > Thanks, > Joel That might be pushing it. The JB needs some time to harden and you might want to do two layers, depending on the depth of the pitting. Do you really think that you have all the gaskets and sealants that you're going to need before you start the job? I have never been that organized. After bending over the engine compartment for an hour or so, I need a break. Of course if you have the engine out of the van, doing the heads will be faster and easier. good luck, Larry A. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.