Date:         Wed, 3 Oct 2001 14:58:55 -0600
Reply-To:     Gnarlodious <Gnarlodious@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Gnarlodious <Gnarlodious@EARTHLINK.NET>
Subject:      Re: got my list stickers the other day, yeah
In-Reply-To:  <004e01c14c46$1d8e47d0$a701a8c0@esavio.com>
Content-type: text/plain; charset="US-ASCII"

The stickers go on the outside.
Peel and stick with care, when I put mine on they came off the backing and
were hard then to align.
The sticky backing actually holds the cutouts in position so you are not
aligning individual cutouts. That part is peeled off last, after you stick
the cutout on the glass.
So what you do is:
Peel the glossy paper exposing the sticky tape of the cutout. Ensure that
the cutout is still stuck well to the sticky sheet at this point. This
cutout is very thin around the outside, take great care.
Stick the whole thing on the glass forcing out air bubbles as you go.
Peel off the sticky sheet last.
Good luck!
Rachel http://www.gnarlodious.com/Vanagon.html

Entity dieselwesty spoke thus:

I can't wait to put them on.  Question, are they meant for the outside glass
or inside glass.

My windows are tinted so my sticker space is very limited on the inside, if
you know what I mean.

I did not look at them that closely but it looks like you can put them on
the outside.
Any help please, where is the best spot to put the big one?


Entity dieselwesty spoke thus:

I can't wait to put them on.  Question, are they meant for the outside glass
or inside glass.

My windows are tinted so my sticker space is very limited on the inside, if
you know what I mean.

I did not look at them that closely but it looks like you can put them on
the outside.
Any help please, where is the best spot to put the big one?
Bryan Belman       Pt. Pleasant, NJ
1990 Audi 200 Turbo (Money Pit)
1982 Westy 1.9l NA (Swap is done)
1970 Type1 Std. Beetle (This one is done)



Rachel http://www.gnarlodious.com