Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2001, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 4 Oct 2001 20:27:43 -0500
Reply-To:     Max Wellhouse <maxjoyce@IPA.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Max Wellhouse <maxjoyce@IPA.NET>
Subject:      Re: Double T Trouble
Comments: To: Robert Young <byoung@RFCI.NET>
Content-Type: text/plain; charset="iso-8859-1"

Shade tree repairs won't work on plastic that has deteriorated over time. One of my plastic T's feeding the rear heater unit all but crumbled in my hand when I removed the hose from it. This was a 90 GL

Dimwitted Moose and Flying Squirrel ----- Original Message ----- From: "Robert Young" <byoung@RFCI.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Thursday, October 04, 2001 4:23 PM Subject: Re: Double T Trouble

> Can't you epoxy something over the hairline crack or seal it some of these > wonder products? I guess duct tape won't work in this case. What about JB > Weld over the crack? > Bob > > At 04:48 PM 10/03/2001 -0700, Richard Ferguson wrote: > >Dear Volks, > >I'm having a difficult time replacing the Double T Piece 1.9L Vanagon > >part #025 121 438 for my 85 Westie. It left me stranded on the side of > >the freeway last week and now it seems VW has discontinued the part!!! > >The Bus Depot has had it backordered for six weeks and the dealer was > >sent a part called 025 121 438B that looked nothing like what I need > >and certainly could not function as a replacement. The part I need is a > >flange piece that goes between the coolant reservoir and the hoses that > >circulate the coolant. It looks like a big H or a "double T." Why would > >VW discontinue this? I have a 2.1 rebuilt engine in my van...it has not > >affected the coolant system tho which is still the one for 1.9. Will I > >have to upgrade to an 86 coolant reservoir & hoses? Is this possible? > >My part developed a hairline split along the middle but not on the > >seam! Strange on such a heavy plastic part I would think. > >Thanks in advance for any helpful suggestions, > >Rick > >85 Westie > > > > > > > >__________________________________________________ > >Do You Yahoo!? > >NEW from Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. > >http://geocities.yahoo.com/ps/info1


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.