In a message dated 10/8/01 3:12:51 PM, latesky@COLORADO.NET writes: << If the allen head is stripped, you could try driving an 12 or 11mm socket on to the bolt with an extension and hammer. It worked for me Aric Wilkerson 84 Vanagon >> Try Vicegrips, or you can just cut the head off with a hacksaw and replace the bolt. Once the CV is off you may be able to just back the threads out with your fingers. Worked that way for me. Steve Lashley SKL Enterprises Inc. http://EuroCampers.com 636-797-9015 636-789-2127 fax |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.