Hi y'all, Well, I screwed up royally last night while cranking down my 1.6NA 12mm stretch head bolts - I loosened one about 25 degrees or so by mistake when I started out.... I ended up tightening them all down a quarter turn, but rather than "trying it out" and running it to see if it's OK, I've decided to bite the bullet and go w/ the Raceware Head studs. (The added luxury for me is that I'll no longer have to fret about whether or not the guy who rebuilt the engine torqued the heads down properly to start with!) Anyway - my question is this. Can I install the Raceware head bolts w/ the engine in the Vanagon and w/o having to take out the rear cabinet in my Westy? Anyone done this? Seems like it might be a real tight fit..... Thanks! John
_________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
|
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.