Date:         Mon, 8 Oct 2001 16:46:04 -0400
Reply-To:     arbosch@RA.ROCKWELL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alan Bosch <arbosch@RA.ROCKWELL.COM>
Subject:      Re: A silly question, and hopefully there's a simple answer
Comments: To: Bob Thompson <bobthom@PREMIER1.NET>
Content-Type: multipart/alternative;

Bob,
I know some on the list are going to cringe at this, but...  When this
happened to me, I sat on the floor of the bus, placed both feet beside the
table for leverage, grabbed the table as close to the latch as possible
(at the bottom of the table, close to the floor) and pulled until the damn
thing finally released.  'Course that renders the spring all but useless
for future use, but that's easily solved too.  My table now stays in the
fold-down position thanks to a five inch strip of Velcro and some crazy
glue.

Short of unbolting and removing the bench seat and taking off the panel
that runs from just behind the drivers seat to the very rear of the bus, I
don't know of another way of getting the table unstuck.  I'd be interested
to hear what others say...

Alan Bosch
& Phred ('88 Wolfsburg)




Please respond to Bob Thompson <bobthom@PREMIER1.NET>
Sent by:        Vanagon Mailing List <vanagon@GERRY.VANAGON.COM>
To:     vanagon@GERRY.VANAGON.COM
cc:

Subject:        A silly question, and hopefully there's a simple answer


Well, as you all know from my previous posts, I bought the Weekender
vanagon.
It runs great, no major problems.  There is a minor problem I'm having
tho, and
the previous owner doesn't know how to solve it.  The table mounted in the
wall
doesn't open, and no amount of pressing, pounding, etc on all areas of the
table
surface will cause the spring latch to release it.  Any suggestions?

Bob Thompson
bobthom@premier1.net


[text/html]