Date:         Wed, 10 Oct 2001 07:19:57 -0600
Reply-To:     Pablo E. Bonilla Fernández
              <pbonilla@ARTINSOFT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pablo E. Bonilla Fernández
              <pbonilla@ARTINSOFT.COM>
Subject:      Clutch kit change
Content-Type: multipart/alternative;

Hi everybody!

Las weekend I installed a new clutch kit (clutch disk, pressure plate,
release bearing) to my vanagon, but since then, on very few ocassions, it is
difficult (and painful!) to switch to reverse. The sound of grinding metal
actually hurts me!

It seems that happens only when the car is hot. Has this happened to anyone
before?

Thanks a lot.

----------------------------------------------------------------------------
- 
Pablo E. Bonilla Fernández 
Freedom/ArtinSoft R&D - San José, Costa Rica 
mailto:pbonilla@artinsoft.com 
----------------------------------------------------------------------------
- 
Privileged, Confidential and (C)opyrighted Information is contained in this
message. 
If you are not the addressee(s) indicated in this message (or responsible
for delivery of the message to such person), in such case, you may not copy
or deliver this message to anyone, you should destroy this message and
notify ArtinSoft immediately.
If you or your employer does not consent to Internet e-mail messages of this
kind, please advise the sender immediately.
Please note that ArtinSoft is not responsible for any kind of damages caused
by any viruses that may be transmitted by this email. It is the recipient
responsibility to scan the attachments, (if any).



[text/html]