Date:         Wed, 10 Oct 2001 18:01:46 -0500
Reply-To:     Stan Wilder <wilden1@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Double T fitting broken
Comments: To: tonyt_eye@NS.SYMPATICO.CA
Content-Type: text/plain; charset=us-ascii

Right on! I'll try to find and remove some.
I understand that they are brittle when they get old so I can't make any
promises.

Stan

On Wed, 10 Oct 2001 17:58:04 -0400 Tony Thompson
<tonyt_eye@NS.SYMPATICO.CA> writes:
> The part is connected by two very short hoses to the expansion (not
> the
> overflow tank) it is only on the 1.9 litre engines. If you look at
> the link
> shown  below it is part #19 referred to as the Double Tee fitting
>
> http://busdepot.com/water19N.htm
>
> If you see any fittings I'd be eternally grateful + I'd buy one and
> pay for
> shipping. Mine has what looks like a hairline crack down the skinny
> interconnecting part that lets an amaxing amount of water blow out.
> The VW part number is 025 121 438 and there is no B after the number
> which
> indicates that it is for a later model van.
>
> Thanks again
>
> Tony
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.