Date:         Thu, 30 Aug 2001 20:11:55 -0500
Reply-To:     Stan Wilder <wilden1@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Double T fitting broken
Comments: To: tonyt_eye@NS.SYMPATICO.CA
Content-Type: text/plain; charset=us-ascii

It rained me out on my trip to the wrecking yards on Thursday but I'm
going today.
Can you tell me the motor prefix for the 1.9 and 2.1 engines, and where
do i find the motor number?

Stan

On Wed, 10 Oct 2001 17:58:04 -0400 Tony Thompson
<tonyt_eye@NS.SYMPATICO.CA> writes:
> The part is connected by two very short hoses to the expansion (not
> the
> overflow tank) it is only on the 1.9 litre engines. If you look at
> the link
> shown  below it is part #19 referred to as the Double Tee fitting
>
> http://busdepot.com/water19N.htm
>
> If you see any fittings I'd be eternally grateful + I'd buy one and
> pay for
> shipping. Mine has what looks like a hairline crack down the skinny
> interconnecting part that lets an amaxing amount of water blow out.
> The VW part number is 025 121 438 and there is no B after the number
> which
> indicates that it is for a later model van.
>
> Thanks again
>
> Tony
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.