In a message dated 10/18/01 8:14:45 PM Pacific Daylight Time, LISTSERV@GERRY.VANAGON.COM writes: << Anyway, what I need right now are the torque specs for the turbo-to-exhaust bolts, and the exhaust-to-head bolts.,>> According to Bentley...... head to exhaust manifold bolts are torqued to 18 ft lb to install the turbo charger: 1st, torque turbo charger to exhaust manifold bolts to 29 ft lb (coat thread and bolt head contact surfaces with hi-temp grease G 000 500) 2nd, torque turbocharger to oil return line to 18 ft lb 3rd, torque oil return line to engine carrier to 18 ft lb turbo charger to exhaust pipes are torqued to 18 ft lb. (From page 21.2 of the quantum Bentley) mark fitzsimons mfitzsim@aol.com Portland, OR |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.