Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2001, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 17 Oct 2001 02:32:46 EDT
Reply-To:     JKrevnov@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rico Sapolich <JKrevnov@AOL.COM>
Subject:      Re: No Subject (aka, Stan-talk)
Comments: To: wilden1@juno.com
Content-Type: text/plain; charset="US-ASCII"

Stan,

OK. Did you take your medication? Got those bifocals adjusted right? Now, if you take a remedial reading course and reign in you imagination, you just might be able to bring some reason to you rhetoric.

Rich

In a message dated 10/17/01 1:55:49 AM, wilden1@JUNO.COM writes:

<< You've got it right "No Subject" all vendors sell fuel injection hose and it all meets the standards. If you're buying all of your parts from VW Dealers, I want to buy your van. It has to be the most pristine, original, virgin, un -adulterated vehicle on the road. All vendors sell 6.5mm, Yada Yada , 7 mm hose that actually fits the VW fittings. I hear tell of VW fuel pumps that put out 100 PSI but I've never seen one go over about 69 psi. and that never happens if your fuel Pressure regulator is working at all.

Stan Wilder 83 Westy Air Cooled 278K Non Virgin VW

On Wed, 17 Oct 2001 01:09:50 EDT Rico Sapolich <JKrevnov@AOL.COM> writes: > In a message dated 10/16/01 11:46:19 PM, bikeputz@HOTMAIL.COM > writes: > > << The fuel line has a rubber core with a braided fabric outer > cover. > The guy behind the counter insisted this was for fuel injection but > it > doesn't seem sturdy enough for the 30 -40 psi pressure in the fuel > system. >> > > Dennis, > > The hose will have an SAE grade on it. You have to find out what > the rating > is according to this identification and determine if it is suitable. > The SAE > standards are generally available information. The information I > have for > SAE hose acceptable for gasoline is: SAE 30R3---3/16" - 500 PSI ; > 1/4" - 400 > PSI. SAE 30R7 is rated at 50 PSI in those sizes. Check it out > yourself > before you use anything other than an authentic VW part. > > Rich > _____________ >>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.