<html><div style='background-color:'><DIV> <P>Rachel:</P> <P>Just my own expereince on this one: I just did this procedure two weeks ago...replacing the rear shoes. After taking the two 10 mm bolts off, I wedged the flat end of a brake adjusting tool between the drum and the steel flashing (real name??) and hit the side of the drum with a hammer and it just about leapt out into my lap. It really did "pop" off. If you want to inspect the shoe thickness there is a small window, usually plugged by a rubber plug which has a little gripper on it to twist and pull it out. You can then use a flash light to look in to see the brake lining thickness if you can get your head in there. Laying on the ground, that's difficult but doable.</P> <P>This all after releasing all the pressure from the brakes by taking the emergency brake off, unscrewing the tension from the e-brake cable, etc.<BR><BR>Bob Stevens </P></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV></DIV> <DIV>'91 Westy</DIV></div><br clear=all><hr>Get your FREE download of MSN Explorer at <a href='http://go.msn.com/bql/hmtag_itl_EN.asp'>http://explorer.msn.com</a><br></html> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.