Phil Go to your FLAPS (friendly local auto parts store). Buy a generic spacer made for something like a Camaro with oval holes. They will work jus as well. Not as pretty but shouldn't cost you more than about $10. Vanagon rotors are too heavy even after you cut them down. Besides cutting them down will probably cost you more than getting the machine shop to make nice aluminum ones. Steel and cast iron is harder to machine than aluminum. BenT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.