Date:         Thu, 25 Oct 2001 09:22:50 -0700
Reply-To:     mike miller <mwmiller@CWNET.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         mike miller <mwmiller@CWNET.COM>
Subject:      Re: Speaking of water runoff...
Comments: To: Richard Bias <rbias@hotmail.com>
In-Reply-To:  <F250bD6bfZj7rYMqTx600011219@hotmail.com>
Content-type: text/plain; charset="US-ASCII"

How about the outside edge of the seal on the top of the windshield?

Mike

> From: Richard Bias <rbias@HOTMAIL.COM>
> Reply-To: Richard Bias <rbias@HOTMAIL.COM>
> Date: Thu, 25 Oct 2001 08:57:50 -0400
> To: vanagon@GERRY.VANAGON.COM
> Subject: Speaking of water runoff...
>
> Goodmorning All,
> Speaking of all this water...  As per the recommendations of this list, I
> sealed, very well, with clear silicone, between my wind shield and the
> rubber window seal.  I put a small screw driver in between the seal and the
> glass creating a little void to stick the tube nozzle for the silicone in
> and ran the whole perimeter of the bottom half of the wind shield.  I
> started about 18 inches up the side and went right across the bottom to 18
> inches up the other side.  This put a wonderful bead of silicone there.  I
> smoothed it out with a wet finger and I was very pleased with the result.
> Then...  it rained a few days later.  I still have a damp rug under the left
> drivers foot! Where could it still possibly be coming from?  The only other
> thing is the antenna.  I don't have the one that extends down through the
> second supporting hole with the rubber seal there.  But this hole is facing
> down...  Anyone have a suggestion or two?  I got to solve this one because I
> just had the Van painted.  Thank you for your time.
>
> Rich and Annemarie
> 85 GL "Buba"
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>