Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2001, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 22 Oct 2001 14:07:16 -0700
Reply-To:     Zoltan Kuthy <zol@FOXINTERNET.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Zoltan Kuthy <zol@FOXINTERNET.NET>
Subject:      South African, 4-speed to 5-speed?
Comments: To: Wolfvan88@AOL.COM
Content-Type: text/plain; charset="iso-8859-1"

Hi Robert, I am about to go to South Africa for a few month. I might be able to look into sending a few of these "gearboxes" back for the List members. What is the number on the transmission that I would have to use? What is the value of one of these? Do you have any idea what it may cost to ship it over here? Thanks for the info, it seems that it is something the guys would want. Zoltan ----- Original Message ----- From: "Robert Lilley" <Wolfvan88@AOL.COM> To: <vanagon@GERRY.VANAGON.COM> Sent: Monday, October 22, 2001 12:27 PM Subject: Re: 4-speed to 5-speed?

> I have used the 5 speed with a .483 ring and pinion with a .70 fifth gear. > > First was TOO low and second was a bit tall to start off. > > Due to a defective LockRite diff, I returned the tranny to have a HD German four spider diff installed. UPS damaged it and I ended up with a 5 speed SA gearbox with a .457 ring and pinion. > > The SA 5 speed gearing is a perfect match to the Power, power band of my modified 2.1L WBX and driving habits and speed limits. I can take it to 75+ mph in fourth if needed and still have another gear. > > 83 Fifth gear rpm drops about 400 rpms. > > It bolts into the stock location with the only modification to ~87 up is to shorten the front engine mount bracket about 1.5". > > Stock shifter works with no modifications(earlier might need modifications due to differences in tranny shifting location). > > The oil fill hole is relocated, the fill hole is at the correct level, no need to guess on the correct oil level. > > I like the first location inline with the reverse. It makes rocking the van out of a sticky spot much easier. > > Once I am moving, I only need to go to first when at a dead stop. > > This modification along with the power modifications has led to increased mileage ~25 highway @70 mph. > > Robert


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.