Entity Alistair Bell spoke thus: > no, not that it can be gotten cheaper elsewhere, but that its to be glued on > to the sump! Actually they make a magnetic heater but the vanagon is an aluminum pan. > 250W may be good enough for most of the lower 48. Definitely > PS I have a block heater in my I$, can't remember the wattage :) The coolant immersion heaters are all 400W >>> the bottom of your engine ( glue provided ) You can also use a pad it to preheat your battery for 30% more cranking power in cold weather, but it doesn't heat your oil. It uses 35 W. >>> I think it is made in Tacoma Washington. More likely Spokane at http://www.kimhotstart.com/
Rachel http://www.gnarlodious.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.