Blake, The brake light switch works on brake fluid pressure in my '84 and there are actually two switches, one for each brake fluid circuit. If only one switch switches, the brake warning light comes on. It is unlikely that both switches have become insensitive, and you didn't mention that the brake warning light lit. So, the answer is without some re-design, you can't make the brake lights come on before there is brake fluid pressure. Maybe your worried that the brake pedal is too low ... moves too far before the brakes start to work. Well, that's a whole different question.
Mike Phoenix AZ |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.