Date: Fri, 2 Nov 2001 14:31:15 -0700
Reply-To: Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Karl Wolz <wolzphoto@WORLDNET.ATT.NET>
Subject: Re: plastic parts to hold-in and adjust headlights are crumbling
That's about what I paid, too.
Karl Wolz
----- Original Message -----
From: "Tonya Pope" <Tonya@HOLOREALITY.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, November 02, 2001 11:56 AM
Subject: Re: plastic parts to hold-in and adjust headlights are crumbling
> Just curious - was there a reason to avoid the dealer?? I bought
> some of these for my van a couple years ago and was pleasantly
> surprised. They had to be ordered, so I waited about a week, but it
> was under $2 it seems. Maybe mine screwed up, but I have found
> that they are extremely reasonable on the weirdest things (and of
> course, exhorbant on others).
>
> Tonya
> 87 Vanagon Wolfs
>
> On 2 Nov 01, at 10:30, Ed Shultz wrote:
>
> > Frank,
> >
> > Please post your results if you find any. Mine are split and crumbling
> > also. I'm afraid every time I remove the front grill and the light
buckets
> > for something.
> >
> > Thanks,
> >
> > Ed
> >
> > At 08:40 AM 11/02/2001 -0500, fty@CISCO.COM wrote:
> > >Ah, the joys of old cars ..
> > >
> > >Nearly all the platic parts that hold in and adjust the headlights are
> > >crumbling on my '86. ETKA shows all the part #s (see below). Was
wondering
> > >if there was another source other than the dealer - checked Bus Depot's
part
> > ># lookup and it has none of them. It's also hard to tell if the part #
> > >refers to the plastic bit *and* the screw, or just the screw.
> > >
> > >Anyone else has headlights that are falling out? Better check!
> > >
> > >cheers - Frank
> > >
> > > >From ETKA:
> > >Position Part # Description Quan (total for
both
> > >sides)
> > >8 255 941 133 adjusting piece 2
> > >9 255 941 133 A adjusting piece 2
> > >10 255 941 141 C adjusting piece 2
> > >11 191 941 297 adapter with adjusting screw 2
> > > for vertical adjustment
> > >12 255 941 141 B adjusting screw 4
> > >
> > >9&12 are for the Hi-beam (smaller light)
> > >8,10,11 for the Lo-beam
> > >
> > >
> >
>\\\\////\\\\////\\\\\////\\\\\////\\\\////\\\\////\\\\////\\\\////\\\\////\
\\\
> > >Frank Terhaar-Yonkers W4FTY TRA 8325/L2
> > >Cisco Systems, Inc.
> > >NSITE - Pineview Building - RTP
> > >7025 Kit Creek Road PO Box 14987
> > >Research Triangle Park, North Carolina 27709
> > >fty@cisco.com voice(919)392-2101 fx(919)392-6927
> >
> >
> > Ed Shultz, RCDD
> > Genuity, Inc.
> > Manager, Network Systems Design
> > NSD Home Page: http://eng-web.genuity.com/net-eng/ipeng/nsd/ipnsd.htm
> > V: 781-262-4324, F:781-262-2744, P:1151209@skymail.com
> >
|