Date:         Fri, 2 Nov 2001 08:40:50 -0500
Reply-To:     fty@CISCO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         fty@CISCO.COM
Subject:      plastic parts to hold-in and adjust headlights are crumbling

Ah, the joys of old cars ..

Nearly all the platic parts that hold in and adjust the headlights are
crumbling on my '86.  ETKA shows all the part #s (see below).  Was wondering
if there was another source other than the dealer - checked Bus Depot's part
# lookup and it has none of them.  It's also hard to tell if the part #
refers to the plastic bit *and* the screw, or just the screw.

Anyone else has headlights that are falling out?  Better check!

cheers - Frank

>From ETKA:
Position        Part #          Description         Quan (total for both sides)
8               255 941 133     adjusting piece                 2
9               255 941 133 A   adjusting piece                 2
10              255 941 141 C   adjusting piece                 2
11              191 941 297     adapter with adjusting screw    2
                                for vertical adjustment
12              255 941 141 B   adjusting screw                 4

9&12 are for the Hi-beam (smaller light)
8,10,11 for the Lo-beam


\\\\////\\\\////\\\\\////\\\\\////\\\\////\\\\////\\\\////\\\\////\\\\////\\\\
Frank Terhaar-Yonkers      W4FTY   TRA 8325/L2
Cisco Systems, Inc.
NSITE - Pineview Building - RTP
7025 Kit Creek Road  PO Box 14987
Research Triangle Park,  North Carolina  27709
fty@cisco.com   voice(919)392-2101 fx(919)392-6927