Date:         Fri, 2 Nov 2001 11:11:56 -0500
Reply-To:     Michelle Pesavento <michellepesavento@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Michelle Pesavento <michellepesavento@HOTMAIL.COM>
Subject:      accident damage: repair or replace?
Content-Type: text/plain; format=flowed

Hi Folks,

Yesterday, the bus ('85 GL) was mercilessly struck by an 18-y.o. in a honda
civic.  All human parties involved had only minor bumps and bruises but the
bus has suffered quite a bit a damage to the rear tire/axle.  I don't know
the technical names for all the torn and bent bits of metal but I'll do my
best to describe the damage.  The most noticeable and troubling damage is to
the area at the front of the drivers side rear wheel-well.  There is a
pin/bolt covered with thick rubber that attaches to the body through a piece
of metal welded to the body.  The pin/bolt was ripped completely through the
metal.  The pin/bolt is attached to a large metal piece that extends back to
the axle, possibly suspension related?  There is another bolt that I think
attaches the axle to the body near where the brake line comes down that is
bent and the rim/axle is bent as well.

My main concern is that pin/bolt that ripped through the metal.  Obviously,
that piece of metal that held it in place will need to be rewelded to the
body/frame.  I worry about the structural integrity and stability of the
weld and suspension and axle.  And, of course, the cost since the insurance
will probably declare the van a total loss and I would be paying for most of
these repairs out of pocket.  Any thoughts are appreciated.

Thanks,
Michelle
'85 GL "Chicken Bus"

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp