Hi Joel, If your table is anything like the one in my 85 Westy GL, look for a plastic knob with a hex head bolt inside. If you pull the knob so the hex head is gripped by it, you should be able to then turn it counter clockwise to loosen the bolt and unlock the table from it's present position. After positioning the table to however you want it, you can then tighten the bolt so it will no longer swivel and will stay in place. Hope this helps, but my table may be quite different than yours. Peter J Willard WA 85 Westy GL "Nesta"
----- Original Message ----- From: "Joel Sell" <jsell@PHILA.K12.PA.US> To: <vanagon@GERRY.VANAGON.COM> Sent: Tuesday, November 13, 2001 7:01 PM Subject: Can't get table to come out
> My table in my '91 weekender won't pop out. No matter how much I push or > bang on the bottom, it stays locked closed. Someone told me once I get it > out I need to adjust the locking mechanism. But I can't get it open to > adjust it, and the person didn't tell me how to adjust it. > ....so almighty list members, how do I do it? How do I get it open, and how > do I keep it from getting locked closed again? > Thanks, > Joel |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.