Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2001, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 13 Nov 2001 11:35:06 -0800
Reply-To:     Bill Kasper <dragonlist@IPMTS.UCSC.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bill Kasper <dragonlist@IPMTS.UCSC.EDU>
Subject:      Re: torque for front wheel caliper bolts?
Comments: To: Larry Alofs <lalofs@enteract.com>
In-Reply-To:  <3BEC65F2.238C6307@enteract.com>
Content-Type: text/plain; charset=US-ASCII; format=flowed

thanks, to all who let me know this. as i said, my loaner wrench ends at 150 ftlb, but matthew pollard has fedexed me one that goes above 200 ftlbs. thanks matthew! and it was a rainy weekend here in santa cruz, and our lake, i mean our carport, was pretty wet.

bill '87 syncro westfalia

On Friday, November 9, 2001, at 03:25 , Larry Alofs wrote:

> Bill Kasper wrote: > >> can anyone with a bentley handy tell me please what the torque numbers >> are for the two bolts that hold the brake calipers on to the front hub >> assembly? i am going to take off my rotors to replace the wheel studs, >> and will need to undo/redo these. and i can borrow a torque wrench >> from >> work, but want to make sure i get one in the correct torque range. >> >> thanks. >> bill >> '87 syncro westfalia >> (madly in love with my wife, who tentatively supports my vanagon habit) > > Assuming your asking about a synchro, > from the back cover of my Bentley: > > "brake caliper to wheel bearing housing......250 Nm (185 ft-lb) > > > have fun, > Larry A. > > > >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.