Date:         Fri, 9 Nov 2001 14:23:13 -0600
Reply-To:     Stan Wilder <wilden1@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: Cruise Control Speed Sensor
Comments: To: hector.zapata@XRXGSN.COM
Content-Type: text/plain; charset=us-ascii

Anybody want a Dana Corportation control head for a cruise control for
20$ us.? (that is the behind the dash mounted unit I speak of).

Stan Wilder
On Fri, 9 Nov 2001 16:03:51 -0500 Hector Zapata
<hector.zapata@XRXGSN.COM> writes:
> The Bentley is correct, I used to have the same problem, and it was
> the
> speed sensor
>
> Hector
>
>
> > I was debugging my cruise control last night using the Bentley
> manual.
> When
> > it came time to check the resistance of the inductive speed
> sensor
> (located
> > on the back of  the speedometer) the manual called for 90 to 110
> ohms. My
> > DMM showed 1.1K. This is 10 times larger than the manual calls
> for. Since
> 10
> > is nice round number I was wondering if the manual might have a
> typo and
> the
> > actual reading should be 900 - 1100 ohms. Anyone out there measure
> this
> > before and what was your reading?
> >
> > Noel - 88 GL
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.