Date:         Tue, 13 Nov 2001 16:24:13 -0800
Reply-To:     Peter Johnson <johnson@SAW.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Peter Johnson <johnson@SAW.NET>
Subject:      Re: Can't get table to come out
Comments: To: Joel Sell <jsell@PHILA.K12.PA.US>
Content-Type: text/plain; charset="iso-8859-1"

Hi Joel,

If your table is anything like the one in my 85 Westy GL, look for a plastic
knob with a hex head bolt inside.  If you pull the knob so the hex head is
gripped by it, you should be able to then turn it counter clockwise to
loosen the bolt and unlock the table from it's present position.  After
positioning the table to however you want it, you can then tighten the bolt
so it will no longer swivel and will stay in place.  Hope this helps, but my
table may be quite different than yours.

Peter J
Willard WA
85 Westy GL "Nesta"



----- Original Message -----
From: "Joel Sell" <jsell@PHILA.K12.PA.US>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Tuesday, November 13, 2001 7:01 PM
Subject: Can't get table to come out


> My table in my '91 weekender won't pop out. No matter how much I push or
> bang on the bottom, it stays locked closed. Someone told me once I get it
> out I need to adjust the locking mechanism. But I can't get it open to
> adjust it, and the person didn't tell me how to adjust it.
> ....so almighty list members, how do I do it? How do I get it open, and
how
> do I keep it from getting locked closed again?
> Thanks,
> Joel