All the cables fit and requires no cutting etc. Just put a spacer on the side of the battery to keep it from sliding if the hold down comes loose. (You can also put a second nut on the hold down to keep it secure...) Also put a piece of plastic on the edge of the battery box under the positive terminal (there is a small space between the edge of the terminal and the metal) to prevent any shorts in the event of battery movement. **I also have a battery anticorrosion pad at the floor of the battery that is about a 1/8" thick. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.