Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (November 2001, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 21 Nov 2001 18:59:43 -0800
Reply-To:     Shawn Wright <swright@ZUIKO.SLS.BC.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Shawn Wright <swright@ZUIKO.SLS.BC.CA>
Subject:      Re: Thumping when start van
In-Reply-To:  <01C17269.F5F6A880.michael.radtke@bull.com>
Content-type: text/plain; charset=US-ASCII

In my case, the noise sounds like it's external.

On 21 Nov 2001 at 8:53, Michael A. Radtke wrote:

> Hello, > > Is it possible that it's a bearing knock? > > When the anti drain back valve fails in the oil filter it is common to get > a couple of thunks from the engine on start before the oil gets going > again. The fix is easy; put in a new oil filter. > > Mike -- Phoenix AZ '84 > > ---------- > From: Michael Radtke X4897[SMTP:michael.radtke@bull.com] > Reply To: michael.radtke@bull.com > Sent: Wednesday, November 21, 2001 7:54 AM > Subject: [Fwd: Thumping when start van] > > > > -------- Original Message -------- > Subject: Thumping when start van > Date: Wed, 21 Nov 2001 05:46:48 -0800 > From: "Greenamyer, William L" <William.Greenamyer@WEST.BOEING.COM> > Reply-To: "Greenamyer, William L" <William.Greenamyer@WEST.BOEING.COM> > To: vanagon@GERRY.VANAGON.COM > > Some of you may have experienced this. The 84GL doesn't do it when I am > trying to listen for the thump. When I start it (maybe 40% of the > time), I > get a single thump and sometimes two thumps. Everything starts fine and > the > van runs pretty good. I am trying to attack some problems still > remaining. > There doesn't seem to be anything loose but I have been wrong on that > before > (and found a bolt or something missing on a bracket). What it sounds > like > is maybe the motor mount is bouncing (for lack of better words to > describe > it). There does not appear to be hard metal contact (like slamming two > bars > together) but it is more like two pieces of metal banging together > through a > piece of rubber. Could the starter be causing this problem? > > William >

Shawn Wright http://zuiko.sls.bc.ca/~swright '85 Jetta TD '88 Westy 2.1L


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.