Stan, How do you adapt the thin brass tube to the end of the grease gun. This sounds like a great solution. William > I use a thin brass tube that is adapted to go in a 3 oz hand held grease > gun and just slip it between the axle and the boot with the clamp > removed. The thin tube is about the same diameter as 1/8" copper line but > is brass and has a thinner wall so the grease will flow. If you use 3 oz > grease tubes.. put one whole tube in there. > Sand is an extraordinary situation..... ask Romel. > You could have had sand in the joints with perfect boots and no holes. > > Stan Wilder |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.