Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (November 2001, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 22 Nov 2001 13:29:04 -0800
Reply-To:     developtrust <developtrust@HOME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         developtrust <developtrust@HOME.COM>
Subject:      A bodywork hammer and a littel patience
Content-Type: text/plain; charset="iso-8859-1"

Today I tackled a little dent in my rear fender. A body shop wanted $250 to pound out a little dent. So I bought a bodywork hammer for $5, took off the rear tire, got out my lantern to light up the inside of the wheel well to see what I was doing, picked up a short piece of 1 by 4 from the wood pile to hold on the opposite side of the dent, and pounded out this little dent. Gently with little taps and patience.

I could not find my bondo and needed only a thimble full so I sprayed on my touch up paint to prevent rust and tomorrow off to Pep Boys for some bondo.

I've done a lot of body work over the years. You would be surprised at the wrecks I have restored with a piece of 2 by 4 and a sledge hammer. This little dent was a piece of cake and took me 5 minutes. Taking off the wheel took longer.

If anyone is a perfectionist like me I encourage you to dedicate a few hours to tap out those little dents and learn the art of bondo work. The trick is to use as little bondo as possible. My final repair will take less than 1/2 thimble full of bondo to fill in the little creases I could not tap out.

William


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.