Date:         Sat, 24 Nov 2001 14:09:13 -0500
Reply-To:     kayakjr@JUNO.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         John Reynolds <kayakjr@JUNO.COM>
Subject:      Re: Seat Modifications
Comments: To: lalofs@enteract.com
Content-Type: text/plain

The rear screens and the front curtains use "button" snaps and snap onto
the van.  These are like the snap fasteners on a coat.  Therefore, the
receiving end in mounted on the van while the push-on button side is
mounted in the fabric.

The receiving ends are screwed onto the van everywhere, except the rear
hatch, where they are riveted.  Hence you must drill out the rivets -
Bring your cordless drill on all junkyard hunts!

John Reynolds




> John,
>   Could you explain what you mean by "drill out the rear snaps"?
> I am interested in using a rear screen in my '91 GL.
>
> Thanks,
> Larry A.
>