Joe, Maybe not! The vanagon heads are prone to crack around the bolt holes. Joe Subject: Re: head gasket resealing progress
> Cound not this tendency be compensated for my setting the torque a touch > higher? Ex: Dialing in 30 when the specs call for 25? > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of > Mike Collum > Sent: Wednesday, 28 November, 2001 18:10 > To: vanagon@GERRY.VANAGON.COM > Subject: Re: head gasket resealing progress > > > > When torquing heads on a VW, the torque must be HELD for a few moments at > the specified amount. A "Click" type wrench clicks off upon reaching the > specified setting and will leave you "Under-torqued". > > ---SNIP--- > > Mike > '84 GL > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.