Date:         Tue, 4 Dec 2001 11:57:46 -0800
Reply-To:     Aristotle Sagan <killer_jupiter@HOTMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Aristotle Sagan <killer_jupiter@HOTMAIL.COM>
Subject:      Re: Hypothetical wiring question
Comments: To: plcz2go@YAHOO.COM
Content-Type: text/plain; format=flowed

I too don't see the downside. As a matter of fact, I always use vaseline
when putting a #10 wire into a #16 crimp connection.

*G*

As long as you have good solid connections between the wire and the
connector, the vasoline will only make the outside edges of the connection
moisture proof.

Great idea.


tim in san jose




>I've been following the posts regarding soldering vs. crimp connections and
>this is a subject that I've been wondering about for quite a while.  I'm
>wondering if someone with actual hard knowledge would be willing to give me
>the benefit of his or her advise.  Having grown up in the 60s learning tube
>electronics and knowing how to make a really good solder connection, I
>almost always go that route when I can.
>
>But I've heard that there are times when soldering is contraindicated.  I
>don't know the reasoning, but it seems that it sounded good at the time.  I
>do know that I always use Vaseline on my battery terminals and they work
>fine and stay free of corrosion.
>
>I've been wondering if it might make good sense to dip wires into Vaseline
>prior to inserting them into crimp connectors.  This might solve the
>corrosion problems and I can't think of any downside.  I've never heard of
>anyone doing this, but it seems to me to be a good idea.
>
>Anyone care to comment?
>
>Scott


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp