Date:         Tue, 4 Dec 2001 19:47:43 -0800
Reply-To:     Mike & Shari <mjgarske@ATTBI.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Mike & Shari <mjgarske@ATTBI.COM>
Subject:      Re: Rear heater core replacement?
Comments: To: Randy Charrette <rcharrette@HOTMAIL.COM>
Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854";
              x-mac-creator="4D4F5353"

Randy,

I don't exactly remember how that thing came out but just rip it out
anyway you can.  I went down to the auto parts store after I pulled out
the 'plastic mistake' and sized it up to a brass heater core that
somewhat matched it.  Next, I secured it into the rear area and put a
shut-off swich on the inlet hose.  Place and secure the fan behind it
and put the cover over the whole schebang.  Your done!



Mike G.

Randy Charrette wrote:

> Well the heater core is leaking in the rear. I have removed the cover
> and see 2 clips holding the front vent cover on. Then there is a
> plastic case with the heater core and blower motor inside. How is this
> case supposed to open. I expected to see screws going in the sides,
> but there were not. I don't want to break anything! Detailed
> directions appreciated! Randy Charrette87' Syncro weekender
>
>
> -----------------------------------------------------------------------
> Get your FREE download of MSN Explorer at http://explorer.msn.com