Date:         Tue, 4 Dec 2001 21:54:21 -0600
Reply-To:     Donald Baxter <onanov@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Donald Baxter <onanov@MINDSPRING.COM>
Subject:      Re: Rear heater core replacement?
Comments: To: Randy Charrette <rcharrette@HOTMAIL.COM>
In-Reply-To:  <F150ibm60wcP2dIuldd0001aeee@hotmail.com>
Content-Type: text/plain; charset="Windows-1252"

That plastic case/cover, to be removed intact, requires the removal of
the entire rear seat on my 1985GL because of the way the vent goes
toward the front to that opening in the panel below the seat.  The bar
behind that panel necessitates the removal of the seat assembly.  I was
irritated, but i took the seat out.
_____

Donald Baxter  Iowa City, Iowa
(319) 337-0494
www.mindspring.com/~onanov





-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Randy Charrette
Sent: Tuesday, December 04, 2001 8:37 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Rear heater core replacement?



Well the heater core is leaking in the rear. I have removed the cover
and see 2 clips holding the front vent cover on. Then there is a plastic
case with the heater core and blower motor inside. How is this case
supposed to open. I expected to see screws going in the sides, but there
were not. I don't want to break anything! Detailed directions
appreciated!

Randy Charrette
87' Syncro weekender

  _____

Get your FREE download of MSN Explorer at http://explorer.msn.com
<http://go.msn.com/bql/hmtag_itl_EN.asp>