You have to replace the case and add the locker gear carrier and shift fork to the innards along with adding the servo and bracketry and vac lines and switch and.....to the outside. It CAN be done by those of you who are comfortable rebuilding a trans. and have some special tools, but otherwise don't try this at home. In round numbers, the stuff costs about $500 (parts only) plus the servo & external stuff which are available by me or Derek Drew...I only have enough to do 2 or 3 of them. Haven't had time to check the link that Jim Arnott sent me, but have been told previously that no limited slip is available. Daryl of AA Transaxle Duvall, WA. (Seattle area) (425) 788-4070 1-877-377-0773 (toll free) aatransaxle.com (web site) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.