Date:         Mon, 10 Dec 2001 09:10:30 EST
Reply-To:     NotaJeep@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Denis <NotaJeep@AOL.COM>
Subject:      Re: Did I adjust my valves/lifters right?
Content-Type: text/plain; charset="US-ASCII"

In a message dated 12/10/01 8:47:05 AM Eastern Standard Time,
wilden1@JUNO.COM writes:

<< I'm getting good
 performance and the lifters quieten almost immediately after starting. >>
 Exactly... IF you adjust them two turns in they NEVER make noise.
the TPI of the adjustment screw working though the rocker arm ration puts the
lifter EXACTLY in the center of it's travel..where it is DESIGNED to be..
Where is all the dissagreement with the 2 full turns coming from???

steve

"Hey! nice Jeep, Mister! "
"Look kid, it's NOTAJEEP! "

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.