Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2001, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 10 Dec 2001 20:22:37 -0500
Reply-To:     Wade Shen <swade@UMIACS.UMD.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Wade Shen <swade@UMIACS.UMD.EDU>
Subject:      The moral of the story is... (Semi-long tale of woe)
Content-Type: text/plain; charset="iso-8859-1"

'Tis the season for fables and parables so here's one that may, hopefully, save y'all the thousands in repair costs that I'll now have to pay.

I just bought a new '90 Vanagon GL the other day. It seemed to be running well, and everything seemed to be in great condition - even the mechanic that I had check it out commented on how well it had been cared for.

Then the other day, I was returning from the Airport (an 80 mile drive round trip) when the flashing LED came on. I was about 1/4 mile from home and it was late in the evening, so I just parked the car, figuring that I would look into the problem the next day.

The next day, I open the engine compartment and noticed that the coolant was low, so I fill everything and start the engine. The blinking LED didn't come on for a while, but when the thermostat opened, I noticed coolant dripping out of the T-connector <-> thermostat housing hose and the LED started blinking again.

After shutting off the engine for a couple of hours, I decided to risk driving the car to the local mechanic (about 2 miles away, but in city traffic). Nervously watching the temp gauge and the blinking LED, it took almost 15 anxious minutes to get to the mechanic. By this time, the temp gauge was almost 3/4 up, steaming coolant out of the broken hose, and a blinking LED all the way (however, there was coolant in the system). I thought to myself, "I should have paid to have her towed."

Well, this morning, upon getting her back from the mechanic, she ran well, but i noticed a small puddle of green coolant under the right cylinder head/engine body interface (God, I hope they forgot to tighten the drain bolt), and the coolant reservoir was down 1/2 from Max. I'm pretty sure it was doing this before...

So it turns out a small risk may turn into a $1300 head gasket job. I guess I should be glad I didn't melt the entire engine.

wade


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.