Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2001, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 11 Dec 2001 08:40:46 EST
Reply-To:     Jimg153@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Gregory <Jimg153@AOL.COM>
Subject:      Part # for deceleration/idle switch on an 84
Content-Type: text/plain; charset="US-ASCII"


   I went to my dealer to get a new full throttle enrichment switch and a
deceleration/idle switch for my 84. The part numbers were changed and the new
dec/idle switch has a longer medal piece that will not fit. It rubs against
the intake air sensor. My questions are: Is 411-927-211 the switch I need? It
would work if I cut the metal bar down to size. Why do they change part
numbers? My original switches number is 003-927-211 it would seem if they
kept this number I would not be in this dilemma.
Thanks for any insight,
Jim Gregory
Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.