Date:         Fri, 14 Dec 2001 21:45:28 -0500
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: New O2 sensor - hesitation when cold
Comments: To: briandeanatkins@NETSCAPE.NET
In-Reply-To:  <71666B41.78AB7A97.0BA42D06@netscape.net>
Content-type: text/plain; charset=us-ascii

Coincidence or it got jealous. It is very rare for the temp sensors to
go bad. The usual problem is the connection. Try disconectiong and
reconnecting the sensors to clean the contacts to see if that helps.

Dennis



-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Brian Atkins
Sent: Friday, December 14, 2001 7:37 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: New O2 sensor - hesitation when cold

OK, I received a lot of good info related to this.  About 75% have
informed me that the O2 sensor doesn't even begin to work until the
engine is warm.  There is also a large pecentage that have experience
with a similar problem and changing the temp II sensor cleared up their
dilemma.

So..., if changing the temp sensor fixed the issue, then my question is
this:  Why would the temp sensor suddenly start acting problematic after
the O2 sensor was changed?

Brian
--




__________________________________________________________________
Your favorite stores, helpful shopping tools and great gift ideas.
Experience the convenience of buying online with Shop@Netscape!
http://shopnow.netscape.com/

Get your own FREE, personal Netscape Mail account today at
http://webmail.netscape.com/