Date:         Tue, 11 Dec 2001 17:36:37 EST
Reply-To:     KENWILFY@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         KENWILFY@AOL.COM
Subject:      Re: Need help with engine running too rich
Comments: To: lsmith@cogeco.ca
Content-Type: text/plain; charset="US-ASCII"

Wow, I wish you had been buying all of that stuff from me I could have my
kid's college paid for by now :)  (Sorry now on to the serious stuff)

You have replaced most of the things that could cause the problem, however
there are still a few things to test.  Try pulling your injectors and testing
them per Bentley to be sure they are not leaking, and also spraying in a nice
pattern.  Have your fuel pressure tested with a gauge.  Try unplugging your
Oxygen sensor and running the van that way.  If this solves the problem then
you could have had a bad AFM which killed your new Oxygen sensor and then the
oxygen sensor is causing the problem now that you have changed the AFM.
Try to take your van to a shop and get them to check your CO (mixture).  See
if adjusting it (via screw in AFM) would help your situation.
These are just a few suggestions.  Please let us know what you find out.

Thanks,
Ken Wilford
John 3:16
www.vanagain.com
Phone: (856)-765-1583
Fax: (856)-327-2242