Volks, Getting quite frustrated with the simplistic instructions in the Bentley manual, i.e, remove circlip, slide reverse gear back unscrew shaft. I have been sliding , and truning both ways in gear, in nuetral, soetimes hoding output etc, etc! no help. Any body got any tricks to get this thing out, what direction do you need to turn shaft to remove, I assume it was normally counterclockwise, its an Aircooled transmission if it matters, TIA.............Joe Omaha |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.