Good evening All, My Van was acting strange on the way home tonight. My left front was making noises and by the time I got near my home, it would actually drag the left front. I saw grease from the grease cover too. I had trouble with the front caliper (same side) so I looked at that first. Jacked the Van up, pulled the wheel, Caliper looked fine. Put the Van down, looked at both back wheels and pulled drums to check brakes. Then I thought, it was definitely the front... Jacked the front back up and grabbed the wheel on the top and pulled... "wiggle, wiggle, wiggle"... I said "Oh no". Pulled the grease cap and metal shavings all over. Blew out my front bearings. Here comes the request for assistance... Bentley tells me I need a "copper drift" to do the front bearings. I don't have one. Do I really need it and could someone point me to a web page that has the front bearing procedure on it? Thank you and Merry Christmas. Richard and Annemarie 85 GL "Buba" _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.