Date:         Wed, 19 Dec 2001 14:19:34 EST
Reply-To:     Willolyn99@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Bill Marshall <Willolyn99@AOL.COM>
Subject:      Re: Clutch Chatter Question
Content-Type: text/plain; charset="US-ASCII"

Interesting idea on the motor mount stuffing - I definitely will try that one
for my Tiico.  As for the exhaust mounts, I made my own using 1/8" iron flat
stock, 3" wide, and bent it over double around a 1/8" by 1/2" strap.  The
strap ends were turned up and holes drilled to accept a bolt to tighten them
around the exhaust.  I drilled appropriate holes and cranked it down.  It has
been the only thing that has lasted so far.  No welding, either, just bent in
a vise and hammered flat.
Good luck

Bill Marshall
85 GL/Tiico
PHX AZ

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.