Date:         Wed, 19 Dec 2001 16:54:31 -0500
Reply-To:     Kenneth D Lewis <kdlewis@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Kenneth D Lewis <kdlewis@JUNO.COM>
Subject:      Re: Adding Just a Tach?
Comments: To: tjhannink@EARTHLINK.NET
Content-Type: text/plain; charset=us-ascii

Tim;
        The Bentley says a resistor network (voltage divider) should be
used when hooking up some test equipment to the coil. Maybe that would
help.

Good Luck and Drive Safely
Ken Lewis
86 Crewcab,60 356
http://Neksiwel.20m.com/

On Thu, 20 Dec 2001 00:15:32 +0800 Tim Hannink <tjhannink@EARTHLINK.NET>
writes:
> I added a Sun Mini-tach to my van but have never been able to get it
> to work properly. Its seems to work fine over 3400 rpm, but pegs
> when the RPM drop below that. I connected the tach signal wire to
> terminal #1 of relay position #4 (reference Bentley Page: 97-108).
> Any ideas?
>
> Tim Hannink
> Goldibox - 1987 Vanagon Camper, Wolfsburg Edition
> Winter Park, Florida
> http://home.earthlink.net/~tjhannink/
>
>
>
> --
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.