Date:         Sat, 15 Dec 2001 19:23:44 EST
Reply-To:     NotaJeep@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Denis <NotaJeep@AOL.COM>
Subject:      Re: Transmission Main Shaft!  Help
Comments: To: Yovanguy@aol.com
Content-Type: text/plain; charset="US-ASCII"

OK..the reverse gear needs to come badk until it almost hits the gear
carrier..AND you need to have the carrier turned so the one of the two
openings is up..this provides enough clearance so that the reverse gear is
past the end of the gap in the two shafts..<wiggle wiggle wiggle> tuning
counter clockwise...

Steve

"Hey! nice Jeep, Mister! "
"Look kid, it's NOTAJEEP! "

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.