Date:         Wed, 26 Dec 2001 17:01:46 -0500
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: BLINKER QUESTION 87 WESTY
Comments: To: WESTYTRAVER@CS.COM
In-Reply-To:  <70DC11B8.087CB879.3D196514@cs.com>
Content-type: text/plain; charset=us-ascii

The rapid flashing indicates a bulb is out. If both bulbs are flashing
check the condition of the sockets and the ground connections. An
incorrect bulb or the front socket being wired wrong can also cause the
problem. Bulbs are 1156 rear, 1157 front (dual filament). The bulb
should only fit in the socket one way. The brighter filament is for the
turn signal.

Dennis



-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Dan Winget
Sent: Wednesday, December 26, 2001 12:33 PM
To: vanagon@GERRY.VANAGON.COM
Subject: BLINKER QUESTION 87 WESTY

Need help from fellow listees,

when making right hand turns my blinkers blink real fast, like a blown
bulb.  I checked all of the lamps and they work fine.  the 4 way
flashers work fine.  any clues as to what may be wrong??

Thanks

Dan