Date:         Fri, 28 Dec 2001 15:55:26 -0500
Reply-To:     Wes V <wverkaart@HARVESTTECH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Wes V <wverkaart@HARVESTTECH.COM>
Subject:      Re: If it's not broken don't fix it? Odometer & CV joints
Comments: To: developtrust <developtrust@HOME.COM>
Content-Type: text/plain; charset="iso-8859-1"

If it's a manual trans you can reverse the half-shafts, re-grease and go
another 140,000.  Color code the inside CV joints with spray paint before
disassembly.
Just unbolt them (without dropping them on your face) re-grease & bolt back
on the opposite sides. Now the bearing surface being worn going forward were
the ones only being used for reversing previously.  Clever, those Germans.
I wrote an article on this for the Transporter a few years back including a
detail of how to make your own "special tool" to easily reach the bolts for
the outer joints.
I can probably dig it up if you need more detailed input.

WesV


> probably could benefit from a replacement. But, considering the old adage
> "If it aint broken, don't fix it" I wonder if this improvement is worth
> doing at this time. Looking at $200 or so in parts if I do it myself and
> $240 extra in labor at my VW dealer if I hire them, the question is this:
> "Is there any real benefit from CV replacement now?" I invite your advice.