Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (December 2001, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 22 Dec 2001 01:20:28 -0500
Reply-To:     "Carrington, Tom" <TCarrington@RELITECH.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Carrington, Tom" <TCarrington@RELITECH.COM>
Subject:      Re: Front bearings...
Comments: To: Richard Bias <rbias@HOTMAIL.COM>
Content-Type: text/plain

Hi Richard,

I have an article on my website about replacing Vanagon front bearings. In that, I write about using a socket to drive the new races is. The pictures are a little dark, but you can get the general idea.

The link is:

http://volksweb.relitech.com/frntbrg.htm

Have fun!!

TomC tcarrington@relitech.com http://www.relitech.com/tomc http://volksweb.relitech.com 85 Vanagon Crew Cab 82 Westy diesel=>gas conversion 81 Checker A-11 (Taxi) 65 Notchback

> -----Original Message----- > From: Richard Bias [SMTP:rbias@HOTMAIL.COM] > Sent: Friday, December 21, 2001 6:53 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Front bearings... > > Good evening All, > My Van was acting strange on the way home tonight. My left front was > making noises and by the time I got near my home, it would actually drag > the > left front. I saw grease from the grease cover too. I had trouble with > the > front caliper (same side) so I looked at that first. Jacked the Van up, > pulled the wheel, Caliper looked fine. Put the Van down, looked at both > back wheels and pulled drums to check brakes. Then I thought, it was > definitely the front... Jacked the front back up and grabbed the wheel on > the top and pulled... "wiggle, wiggle, wiggle"... I said "Oh no". > Pulled > the grease cap and metal shavings all over. Blew out my front bearings. > Here comes the request for assistance... Bentley tells me I need a > "copper > drift" to do the front bearings. I don't have one. Do I really need it > and > could someone point me to a web page that has the front bearing procedure > on > it? Thank you and Merry Christmas. > > Richard and Annemarie > 85 GL "Buba" > > _________________________________________________________________ > Send and receive Hotmail on your mobile device: http://mobile.msn.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.