Every once in a while, the van (90 syncro westy w/ recent Tiico I4 conversion) won't start. This problem occurred BEFORE the (professionally done) engine conversion. Turn the key, and nothing, just a click. Jump starting the van works, either from another vehicle or from the auxiliary battery. Not sure how to suss out if it's in the ignition switch, the solenoid, or the starter motor itself? Or any other thoughts? This is not a constant problem, and sometimes turning the key off and on a few times gets it starting. It starts right up once the right contact is made. (But where is the contact not being made/and is it merely a question of not quite enough juice from the main battery to override whatever electrical gremlin is in there? ) Thanks for any and all replies. John SLC 90 syncro westy, Tiico powered |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.